Jee Labs Talk » How can I fix ... ?
| Topic | Posts | Last Poster | Freshness |
|---|---|---|---|
| xm10 receive x10 commands | 2 | Gert-Jan Niewenhuijse | 21/03/2011 19:16:41 |
| Graphics Board contrast problem | 1 | Lace | 21/03/2011 14:58:18 |
| Sketch not loading even thought arduino says it did | 7 | tankslappa | 20/03/2011 13:11:04 |
| rfm12b different approach | 1 | grabbo | 20/03/2011 09:31:55 |
| fritzing | 1 | stephanschulz | 19/03/2011 23:44:34 |
| Hope RFM12BP 433 MHz Wireless Arduino Shield | 1 | plutonomore | 18/03/2011 23:31:04 |
| Using RFM22B to decode OOK Transmission | 4 | jradcliffe | 18/03/2011 19:02:57 |
| DRSSI problems | 6 | thenessie | 18/03/2011 12:02:42 |
| RF12poll() | 2 | Jean-Claude | 18/03/2011 00:09:46 |
| Latest roomNode.pde | 4 | JohnO | 17/03/2011 16:49:17 |
| Convert a Jeenode to a Norduino! | 9 | Jean-Claude | 17/03/2011 16:23:19 |
| Waterproof Arduino | 16 | Jean-Claude | 16/03/2011 12:59:13 |
| ez430 chronos | 3 | epokh | 16/03/2011 11:31:58 |
| JCW and his email provider | 3 | JohnO | 14/03/2011 11:54:28 |
| Interesting rfm looking chip from avantcom | 1 | epokh | 14/03/2011 10:58:25 |
| My FTDI board stopped working... | 6 | tankslappa | 14/03/2011 07:32:59 |
| RFM12B board on Arduino with ethernetshield? | 15 | jamescw | 13/03/2011 12:18:05 |
| JeeLink Flash memory | 21 | Jean-Claude | 12/03/2011 23:55:59 |
| Sending to a sinle node | 1 | kafka82 | 12/03/2011 10:33:44 |
| Transceiver | 7 | kafka82 | 12/03/2011 10:29:39 |
| JCWs E-mail Service is unavailable | 2 | Jean-Claude | 11/03/2011 23:38:47 |
| OOK with the JeeNode/RFM12 | 2 | Jean-Claude | 11/03/2011 23:33:44 |
| How to configure RFM12 and EtherShield both with fix SPI_SS on pin10 | 7 | gentor | 11/03/2011 16:16:21 |
| Making the RFM12/Ports libs work with the at90usb162 | 4 | solexious | 10/03/2011 16:50:57 |
| Arduino UNO with Adafruit's motor shield and RFM12B Board | 1 | rubensmau | 09/03/2011 10:24:46 |
| lots of RF traffic around?! | 6 | Jean-Claude | 08/03/2011 23:55:48 |
| When TI meets Nordic: MSP430+NRFL24L01 sensor node | 1 | epokh | 08/03/2011 16:33:14 |
| Multiple LuxPlug modules on the I2C bus problem | 1 | vovkus | 08/03/2011 00:30:45 |
| Short range of rfm12b 433mhz | 5 | solexious | 07/03/2011 20:55:34 |
| LCD plug just showing black squares | 1 | andywatson | 04/03/2011 23:55:41 |
| nunchuck demo problem | 10 | ericvrp | 04/03/2011 01:02:13 |
| Temperature with DHT22 | 11 | kafka82 | 03/03/2011 23:51:22 |
| Timer interrupt and Pin Change Interrupt | 1 | kami | 03/03/2011 21:13:54 |
| heading board X and Y mistery | 6 | ericvrp | 03/03/2011 13:04:25 |
| 1 wire network and jeenodes? | 36 | drbech | 03/03/2011 08:56:51 |
| GLCD library font | 13 | jcu | 03/03/2011 05:48:28 |
| Problems using JeeMon on FritzBox | 10 | thenessie | 02/03/2011 16:17:15 |
| Receiver quality in 433 OOK plug | 21 | JohnO | 01/03/2011 16:34:25 |
| ookrelay2 - is it possible to 'dump' unknown protocols | 1 | JohnO | 01/03/2011 14:12:10 |
| .. this interrupt sleep problem? | 1 | kami | 01/03/2011 10:30:52 |
| Remote temperature using TMP421 | 5 | andywatson | 28/02/2011 21:44:11 |
| JeeNode USB dead? | 6 | panosnl | 28/02/2011 20:53:07 |
| Odd thing in roomNode.pde | 18 | bauhaus53 | 28/02/2011 17:20:22 |
| Programming Jeenode with Arduino | 9 | kafka82 | 28/02/2011 17:09:27 |
| Problem uploading a new sketch to JeeNode v5 | 6 | Lurks | 28/02/2011 08:35:53 |
| Roomnode without PIR | 8 | Jean-Claude | 27/02/2011 23:53:14 |
| Wakeup with Interrupt Pin 3? | 1 | kami | 27/02/2011 18:43:20 |
| Weird activity on B0 during RF12 use | 1 | Lurks | 27/02/2011 02:17:40 |
| JeeNode USB not uploading/resetting | 2 | Lurks | 27/02/2011 02:09:01 |
| Problem with RF12 library | 2 | Jean-Claude | 26/02/2011 14:12:29 |
| Powering jeenode v5 | 2 | Jean-Claude | 25/02/2011 15:04:01 |
| JeeLink not showing up as a device in OSX | 2 | seigel | 24/02/2011 19:43:29 |
| 6 header pin farnell code or similar | 5 | baustromverteiler | 24/02/2011 09:52:58 |
| Programming two SHT11's with the actual Ports librairy | 3 | on4lp | 23/02/2011 07:58:32 |
| RoomNode | 10 | dd180 | 22/02/2011 13:20:40 |
| no +3v on jeenode | 8 | Jean-Claude | 22/02/2011 01:09:13 |
| Carrier board weirdness | 8 | kylegordon | 22/02/2011 00:00:15 |
| power jeenode/carrierboard/ethernode with dc jack | 2 | Jean-Claude | 21/02/2011 17:00:59 |
| Daily web log? | 12 | Zooer | 20/02/2011 14:55:57 |
| Modified grouprelay sketch with local sensors - odd happenings | 2 | zaphodbb | 20/02/2011 11:14:32 |
| backlight not working with lcd plug | 10 | Jean-Claude | 19/02/2011 18:12:22 |
| scrolling graph graphics board | 7 | tankslappa | 19/02/2011 16:39:58 |
| OOK 433 | 1 | JohnO | 19/02/2011 13:07:51 |
| Array of ds18b20 addresses | 7 | E_lexy | 18/02/2011 13:53:42 |
| Kaku_demo working, RF12demo not? | 5 | baustromverteiler | 18/02/2011 10:08:42 |
| Change name of USB serial port in Mac OS? | 2 | baustromverteiler | 17/02/2011 07:11:49 |
| Arduino running at 3,3 v behaving strange | 4 | mdamen | 16/02/2011 23:12:48 |
| Connecting SHT11 and RF12 on the same I2C bus? | 3 | RideZeBigOne | 15/02/2011 22:13:11 |
| The New PIR sensor used in RoomNode | 2 | Jean-Claude | 15/02/2011 10:05:12 |
| Send and Receive trouble | 1 | bld | 12/02/2011 19:10:05 |
| RF12 vs Fast PWM | 5 | kael | 12/02/2011 17:56:15 |
| RF12 getting stuck when sending/receiving lots of packets | 1 | noursy | 11/02/2011 14:06:21 |
| How to build Ook_OSV2.pde? | 3 | ErikR | 11/02/2011 11:14:38 |
| Where to get headers for Carrier Board SPI/ISP connection? | 4 | ErikR | 11/02/2011 11:05:45 |
| BMP085 "C" question | 2 | Jean-Claude | 10/02/2011 10:17:24 |
| dump the current rf12 register settings | 3 | Jean-Claude | 08/02/2011 13:56:35 |
| Proper use of rf12_easySend()? | 3 | ErikR | 06/02/2011 22:56:30 |
| Energy Detective TD 5000: power monitoring system | 1 | epokh | 06/02/2011 18:27:12 |
| Which LCD's can I use with the new GRAPHICS (GLCD) board | 5 | coolj | 05/02/2011 19:07:48 |
| ookScope questions | 4 | Joop | 05/02/2011 16:46:34 |
| AA Power board problem - circuit board fault | 3 | tor | 05/02/2011 14:29:10 |
| DHT22 Temp-Humidity sensor on Jeenode | 5 | kafka82 | 05/02/2011 12:50:46 |
| BMA020 Get them while you can,.. | 3 | Jean-Claude | 02/02/2011 11:31:28 |
| RF12 driver initialization delays - who is running into this? | 13 | tankslappa | 02/02/2011 07:47:52 |
| Mapping ports/plug pins to arduino pins | 4 | Deanna | 02/02/2011 01:17:11 |
| Driving the Analog Plug | 3 | WWWombat | 01/02/2011 18:05:30 |
| opto-coupler 2v input | 2 | Jean-Claude | 01/02/2011 13:42:45 |
| Gravity Plug on Arduino Uno | 3 | binaryconceptz | 30/01/2011 22:15:50 |
| I'm using the EterNode and I can't see any sniffed traffic. | 18 | Jean-Claude | 30/01/2011 10:56:38 |
| Don't understand output of Rf12Demo | 4 | Jean-Claude | 28/01/2011 14:39:27 |
| Only backlight on the Graphics Board and no working display | 6 | Jean-Claude | 28/01/2011 14:36:22 |
| jeelabs.org down ? | 2 | Jean-Claude | 28/01/2011 09:25:53 |
| Unable to program a JeeNode | 5 | MrMolgan | 27/01/2011 10:13:55 |
| Circulus vitiosus - RF12 breakdown | 1 | hacker007 | 26/01/2011 07:33:47 |
| Talking to JeeLink in Debian | 7 | Petri | 24/01/2011 14:25:53 |
| Memory plug pagesize | 3 | redguy | 23/01/2011 23:40:40 |
| problems with Room Node display | 8 | zaphodbb | 22/01/2011 17:30:08 |
| 3x LiFePO4 battery for low noise 10V voltage reference | 4 | tankslappa | 20/01/2011 19:43:15 |
| Hardware I2C with Ports? | 2 | Jean-Claude | 20/01/2011 15:22:39 |
| Find a spare digital port for OneWire | 3 | Lurks | 18/01/2011 10:09:06 |
| carrier board and the DC jack | 6 | Jean-Claude | 15/01/2011 23:23:27 |
| FTDI over carrier board | 7 | s.mihai | 15/01/2011 08:32:54 |
| Problem compiling RF12demo | 3 | JohnO | 14/01/2011 21:26:24 |
| EtherCard capacitor question | 8 | s.mihai | 14/01/2011 21:22:46 |
| Memory plug and memory_demo questions | 7 | Jean-Claude | 14/01/2011 17:32:43 |
| Arduino IDE compile error message on sketch rf12serial | 7 | tankslappa | 12/01/2011 23:32:56 |
| AGHW-JeeNode v4 stop working... | 3 | jimh | 12/01/2011 18:55:42 |
| roomNode RF12Demo ack problem. | 7 | Jean-Claude | 09/01/2011 22:59:20 |
| Battery input.3.3V, but can it handle up to 4.2V on the 3.3V input? | 10 | Jean-Claude | 08/01/2011 10:31:43 |
| JeeNode + EtherShield | 4 | Jean-Claude | 05/01/2011 21:40:46 |
| Wireless Surveillance | 6 | Elros | 05/01/2011 09:23:16 |
| RF12 crc errors | 3 | accelerator | 04/01/2011 22:41:28 |
| Multiplexing small DC pumps | 8 | tankslappa | 03/01/2011 22:03:30 |
| Programming a JeeSMD Controller | 11 | kami | 03/01/2011 21:44:41 |
| graphicboard, max voltage | 3 | bgreene | 03/01/2011 20:56:27 |
| AA node + box + carier board + jeenode | 3 | Jean-Claude | 03/01/2011 11:44:48 |
| Thermoplug wrong transistor footprint | 3 | Jean-Claude | 03/01/2011 11:39:49 |
| Roomnode sketch not detecting SHT11 or LDR | 5 | martinl | 30/12/2010 09:17:04 |
| JeeNode RF12 part not transmitting, maybe..? (Newbie question, be nice) | 5 | Mikey | 29/12/2010 21:11:12 |
| Jeemon newbie, the datatables.net.html has no data | 5 | gyrolen | 29/12/2010 12:50:33 |
| oops | 2 | Jean-Claude | 28/12/2010 22:32:02 |
| Spam filtering... | 3 | raalst | 23/12/2010 21:52:09 |
| usb bub problem or jeenode 5 problem ? | 11 | bgrr | 23/12/2010 19:27:45 |
| MOSFET plug as led strip controller, voltage regulator get's hot. | 13 | Zooer | 21/12/2010 17:01:54 |
| Multi platform data recorder for JeeNodes | 3 | Jean-Claude | 21/12/2010 16:37:00 |
| Another USB-BUB dead | 9 | mdamen | 21/12/2010 14:46:36 |
| graphics board - weird problem | 30 | tankslappa | 21/12/2010 13:35:47 |
| Arduino Duemilanove with RFM12B | 3 | tankslappa | 17/12/2010 11:28:47 |
| jeenode v5 without radio - can't flash it | 3 | kael | 17/12/2010 04:02:32 |
| Problems with Infrared plug | 2 | Jean-Claude | 16/12/2010 15:08:59 |
| Current source plug | 3 | Rubi | 13/12/2010 16:35:26 |
| Wrong sending of values | 8 | tankslappa | 12/12/2010 14:23:06 |
| cant locate ports.h | 8 | tankslappa | 11/12/2010 14:51:49 |
| Analog Plug v2 (18 bit 4-channel ADC) I2C address not as shown | 5 | Jean-Claude | 10/12/2010 21:04:08 |
| roomnode waitforack minor bug | 7 | MrMolgan | 09/12/2010 21:11:26 |
| RFM12 868MHZ + Arduino - no send/receive | 7 | epokh | 08/12/2010 23:53:43 |
| Sht21 samples | 3 | Rubi | 08/12/2010 12:01:42 |
| Renesas design contest | 1 | Rubi | 06/12/2010 10:27:41 |
| Which frequency is my pair of JeeNode v.5 working | 3 | billericayboy | 06/12/2010 00:19:57 |
| Wireless powersupply | 7 | Rubi | 05/12/2010 19:57:27 |
| Roomboard | 5 | MrMolgan | 03/12/2010 17:51:18 |
| no power on jeenode | 6 | Jean-Claude | 01/12/2010 11:35:20 |
| IRC channel #jeenode @ irc.freenode.net | 6 | alejo | 30/11/2010 21:29:27 |
| memory | 4 | Joop | 30/11/2010 08:26:49 |
| roomNode.2 bug? | 2 | Jean-Claude | 29/11/2010 23:23:18 |
| error: ‘watchdogEvent’ is not a member of ‘Sleepy' | 6 | cinch123 | 28/11/2010 21:43:53 |
| wifi galvanic vestibular stimulation | 2 | Jeroen | 27/11/2010 19:01:11 |
| IR Plug basics | 10 | Charly | 27/11/2010 16:06:53 |
| Little help with the RGB using dimmer plug? | 7 | adilson | 25/11/2010 00:23:00 |
| roomnode minor bug | 8 | Jean-Claude | 23/11/2010 21:32:19 |
| Graphics Board Problem | 5 | fishy6969 | 22/11/2010 21:03:43 |
| Jeenode with wave-shield | 1 | Joop | 14/11/2010 18:25:40 |
| Simple RF Sender/Receiver (not working) | 8 | RideZeBigOne | 11/11/2010 16:05:57 |
| AVRLink not working | 6 | abryx | 10/11/2010 19:16:22 |
| read more than one channel from 4-channel analog plug (MCP3424) | 5 | jbeale | 09/11/2010 22:56:28 |
| Receiving RF12 data | 4 | Jean-Claude | 09/11/2010 22:29:51 |
| ModernDevice JeeNode v.4 kit has wrong voltage regulator | 3 | pb | 09/11/2010 21:52:24 |
| JeeNode V3 Voltage Regulator Silkscreen Correct? | 8 | jbeale | 08/11/2010 23:30:26 |
| DS18B20 reading | 8 | mauzer | 02/11/2010 17:39:27 |
| jnode v5 | 3 | Max | 29/10/2010 07:56:47 |
| JeeMon can't open COM port on WinXP | 9 | mauzer | 27/10/2010 15:22:15 |
| LCD.createChar() problem | 2 | frank | 26/10/2010 12:10:43 |
| Can't upload to jeelink | 4 | Jean-Claude | 26/10/2010 00:39:17 |
| Anyone using Windows 7 or Lazarus/FPC on Mac/Linux? | 9 | tankslappa | 22/10/2010 09:34:45 |
| LCD Plug: text very dim even after turnig contrast pot | 11 | tankslappa | 20/10/2010 16:44:38 |
| Arduino Pro Mini + rfm12b driver support | 7 | epokh | 20/10/2010 10:45:27 |
| rf12_canSend loop hangs | 3 | Jean-Claude | 19/10/2010 21:22:51 |
| Get 1-wire DS1820 Temperature with Jeenode and Thermoplug. | 1 | kami | 19/10/2010 12:16:29 |
| Starting with the JeeNode/Carrier Board/Ether Card | 3 | pieterjm | 18/10/2010 18:04:22 |
| JeeLink hangs on RF send when another USB device in use | 5 | martin | 18/10/2010 04:36:06 |
| Dimmer plug and several meters of RGBW strips | 8 | Zooer | 17/10/2010 09:36:00 |
| AA Powerboard no go | 3 | Jean-Claude | 16/10/2010 23:36:13 |
| Get info from rf12_lowbat() in sleepmode? | 2 | Jean-Claude | 14/10/2010 07:00:05 |
| Works great , but | 5 | Jean-Claude | 14/10/2010 06:35:16 |
| Can I use the Jeenode to send to send data with 433 Mhz? | 16 | Jean-Claude | 12/10/2010 10:02:44 |
| Why does it always send data 7 Times. | 5 | Jean-Claude | 10/10/2010 11:23:33 |
| LEDs on Output Plug do not turn off completely | 5 | johnbs | 08/10/2010 21:23:22 |
| LCD plug on arduino | 3 | rikkertkoppes | 06/10/2010 19:36:09 |
| input plug digiRead2 | 7 | Max | 04/10/2010 11:01:25 |
| Using the USB BUB with the JeeNode | 2 | Jean-Claude | 03/10/2010 14:55:18 |
| Temperature logging | 22 | mountaindude | 01/10/2010 19:25:49 |
| This LCD has a very confusing pinout -SD 1602G2 -LCD plug wont work | 5 | Jean-Claude | 30/09/2010 19:46:55 |
| New project for transfering gas consumption meter | 16 | Jean-Claude | 30/09/2010 19:42:32 |
| Audio Data Burst Transmission | 7 | epokh | 29/09/2010 07:55:09 |
| jeemon spectrum problem | 3 | redsonic | 28/09/2010 13:57:51 |
| Battery power issues, JeeNode4 | 3 | Jean-Claude | 26/09/2010 18:20:37 |
| opto-coupler problem | 3 | Jean-Claude | 26/09/2010 13:23:37 |
| How to use Inputplug as mini arduino | 18 | frank | 24/09/2010 08:43:17 |
| Demoprograms Projects on Foam, Receiving data | 3 | altprog | 21/09/2010 10:08:08 |
| Can't get ELV PIR to work | 5 | Digit | 20/09/2010 19:17:53 |
| Ports library and Windows 7? | 3 | Jean-Claude | 18/09/2010 22:51:40 |
| HowTo Resume LowPowerMode in a Interrupt-Function | 4 | axel | 16/09/2010 09:45:05 |
| rf12 highspeed | 1 | frank | 14/09/2010 11:44:02 |
| Mounting the jeenode | 4 | fishy6969 | 12/09/2010 21:31:45 |
| RGB Led strip control sketch (posted on news.jeelabs.org) | 10 | Jean-Claude | 12/09/2010 11:29:55 |
| JeeLink v2 with new memory breaks RF12demo | 7 | David | 11/09/2010 00:16:21 |
| Ethernode data in JeeMon as web server | 35 | Jean-Claude | 07/09/2010 12:05:11 |
| Gravity Plug library extension | 13 | Rowfast | 02/09/2010 05:46:41 |
| RF12.read() where is the code? | 4 | byungjun | 01/09/2010 06:36:12 |
| RF12 demo - specific node is not acknowledging | 10 | Jean-Claude | 27/08/2010 22:29:17 |
| Rooms.Sketch: Change SendIntervall | 2 | Jean-Claude | 24/08/2010 07:15:53 |
| low report on analog in | 4 | Jean-Claude | 23/08/2010 18:49:57 |
| Real time Status GUI | 14 | rinie | 23/08/2010 05:35:36 |
| RF12 with JeeLabs-Library on a Pollin NetIO-AddOn Board | 1 | Lupus | 17/08/2010 08:42:11 |
| Library issues | 3 | SSzretter | 16/08/2010 15:12:16 |
| AREF PIN on Jeenode | 3 | epokh | 14/08/2010 23:24:52 |
| I can only receive one time with this code. | 5 | Jean-Claude | 14/08/2010 10:13:06 |
| Fixed GravityPlug code | 1 | Jean-Claude | 09/08/2010 11:32:13 |
| Jeenode new user, they don't talk | 2 | yaba | 05/08/2010 08:12:54 |
| RFID meets JeeNode | 8 | sysrun | 03/08/2010 12:23:50 |
| Upload to JeeNode v4 fails | 8 | gregor | 30/07/2010 13:22:44 |
| how to get rf12_recvDone to pause long enough to actually get good data | 3 | szac | 29/07/2010 03:24:08 |
| 433 mhz AM retransmitter question | 7 | tankslappa | 27/07/2010 21:24:47 |
| Jee-B-Gone | 3 | yaba | 27/07/2010 12:06:43 |
| map arduino i2c pins to jeenode | 6 | lordmundi | 26/07/2010 01:06:10 |
| howto start using jeemon from scratch | 21 | Zooer | 23/07/2010 21:39:47 |
| Using a jeenode in a protoboard | 1 | adilson | 22/07/2010 00:31:56 |
| Pogo pins... | 4 | edwardhorsford | 21/07/2010 08:41:46 |
| "Config save failed" | 5 | baustromverteiler | 17/07/2010 06:18:18 |
| LCD plug in Arduino | 2 | Jean-Claude | 13/07/2010 11:47:18 |
| avrdude: stk500_recv(): programmer is not responding error | 5 | szac | 13/07/2010 02:58:55 |
| JeeLink v2 not receivig anymore | 4 | sysrun | 08/07/2010 07:08:57 |
| Possible RFM12b bug ? | 6 | Jean-Claude | 07/07/2010 15:42:25 |
| multiple 18B20 temperature readout | 4 | Jean-Claude | 01/07/2010 19:35:19 |
| IRC Channel | 5 | epokh | 28/06/2010 21:58:36 |
| Online Chat Room | 4 | Jean-Claude | 27/06/2010 22:35:28 |
| LCD, I2C and interrupts | 3 | tankslappa | 26/06/2010 19:43:12 |
| RTC Plug Battery Socket Improvement | 4 | Jean-Claude | 26/06/2010 15:36:37 |
| JeeNode + Garage | 7 | Professor Chaos | 23/06/2010 18:28:11 |
| interesting protocol challenge | 8 | mdamen | 23/06/2010 13:45:08 |
| JeeMon tcl version? | 4 | Jean-Claude | 21/06/2010 11:51:49 |
| Interesting: Codec-Adaptive Wireless Relay | 2 | loomi | 20/06/2010 22:49:34 |
| Ethernet stomps on RF12 transmission | 8 | Professor Chaos | 20/06/2010 02:32:10 |
| Error accessing RF12demo at Google Code | 2 | Jean-Claude | 18/06/2010 16:23:13 |
| Can't seem to get my LCD plug to work. | 13 | Jean-Claude | 18/06/2010 09:18:03 |
| attaboy. | 1 | moiseybox | 17/06/2010 22:36:05 |
| input plug problem (not multiplexing) | 6 | stef007 | 16/06/2010 22:10:27 |
| RF12Demo sketch - not sending ack | 6 | Jean-Claude | 14/06/2010 00:09:32 |
| Serial LCD-Display | 12 | Jeroen | 12/06/2010 19:37:27 |
| JeeLink v2 doesn't work properly | 5 | Jossie90 | 10/06/2010 21:17:11 |
| Jeenode PCB antenna coming soon | 4 | epokh | 10/06/2010 18:33:51 |
| PingPong - problem with TX/RX mode changing | 4 | Jean-Claude | 09/06/2010 09:18:08 |
| FTDI only sending junk | 25 | tankslappa | 08/06/2010 17:11:07 |
| rooms sensor >25.5 degrees possible bug ? | 2 | Jeroen | 05/06/2010 15:14:16 |
| Convert rf12_data[] byte array to long unsigned int | 4 | Jean-Claude | 04/06/2010 18:44:48 |
| How to test the PIr sensor | 10 | epokh | 03/06/2010 14:25:06 |
| "RFM12B library for Arduino" fail in the schematic??? | 5 | Jean-Claude | 02/06/2010 12:35:55 |
| IC socket doesn’t fit on the PCB | 4 | Jean-Claude | 31/05/2010 22:40:46 |
| Jeenode PWM pins (IR Led) | 7 | epokh | 30/05/2010 21:55:22 |
| Problems with Jeenode V4 | 5 | Jean-Claude | 30/05/2010 21:11:53 |
| can not send data via rf12 | 5 | Jean-Claude | 30/05/2010 12:18:05 |
| memory plug v2 problem | 10 | Jean-Claude | 28/05/2010 11:34:02 |
| Analog plug 3.3v and gnd reversed on mcp3424 footprint? | 14 | bvwelch | 28/05/2010 10:24:56 |
| Help, love the Jeenode with the carrier board and ethernet card but... | 2 | Jean-Claude | 25/05/2010 20:50:07 |
| A suggestion for the next Jeenode USB | 6 | Jean-Claude | 25/05/2010 15:16:26 |
| Transmitter/Receiver Range. | 15 | Jean-Claude | 24/05/2010 18:49:31 |
| Lux Plug on a sunny day?? | 4 | Digit | 21/05/2010 07:46:36 |
| how can I fix ... library request for RF12.h | 5 | raalst | 19/05/2010 16:04:21 |
| Tweet A Watt or Jee A Watt? | 1 | epokh | 18/05/2010 23:45:48 |
| using 5 volt home-made MAX232/programming cable with 3.3 volt JeeNode? | 2 | Jean-Claude | 18/05/2010 07:39:42 |
| Length of wire between plug and JeeNode | 2 | Jean-Claude | 16/05/2010 22:30:00 |
| Lloytron wireless switches anybody tried them? | 2 | Jean-Claude | 16/05/2010 21:14:21 |
| Voltage Regulator on Jeenode | 3 | fishy6969 | 15/05/2010 17:45:15 |
| "Config save failed" on JeeNode after giving simple command | 5 | Mars | 14/05/2010 12:18:31 |
| Having trouble getting started. | 6 | Jean-Claude | 13/05/2010 22:05:29 |
| cmucam3 jeenode COOL | 1 | epokh | 06/05/2010 09:11:44 |
| OOK Decoder not working | 3 | TreibAir | 05/05/2010 15:22:07 |
| Pressure Plug Code | 7 | hve | 04/05/2010 03:03:57 |
| Mind Flex proablby use RF12 | 1 | epokh | 01/05/2010 11:29:05 |
| FIX for PORT examples | 3 | epokh | 01/05/2010 11:22:31 |
| Modern Device Dual Axis Gyroscope | 3 | epokh | 30/04/2010 18:27:41 |
| Not getting an ack when sending to single node | 2 | Jean-Claude | 30/04/2010 12:57:54 |
| Starting with JeeLink and I think I messed up one already :( | 4 | radiotrib | 29/04/2010 14:41:32 |
| JeeNode USB v3 and Arduino application for Windows | 6 | Pedro | 28/04/2010 20:57:20 |
| jeenode v4 not accepting code | 10 | Jean-Claude | 27/04/2010 15:49:34 |
| Retrieving sketch from JeeNode | 6 | hve | 27/04/2010 12:31:36 |
| Help with Multiple plugs on JeeNode | 19 | Jean-Claude | 26/04/2010 17:01:52 |
| x10 with jeenode | 1 | Geko | 23/04/2010 11:15:02 |
| Jeemon SysDep listSerialPorts WinXP | 13 | rinie | 22/04/2010 06:16:58 |
| RF12Demo Issue | 4 | ruurdjan | 17/04/2010 10:33:05 |
| Problem with LCD | 5 | tankslappa | 16/04/2010 00:53:34 |
| Trouble Compiling RF12demo | 3 | solarkennedy | 13/04/2010 01:01:57 |
| Need some debugging help. | 15 | MarvinGS | 12/04/2010 16:18:40 |
| Startup issues on batteries with LCD | 22 | MarvinGS | 12/04/2010 14:53:22 |
| RF12demo can send, but bad receive | 3 | danlangford | 08/04/2010 18:10:17 |
| AM TX & RX Modules | 5 | wwolkers | 07/04/2010 16:33:30 |
| Not receiving? Add a Reset button | 20 | Ian | 07/04/2010 11:58:31 |
| where is the bottleneck? SPOTDuino Project. | 2 | Joop | 07/04/2010 06:53:09 |
| Send and receive a Textstring | 4 | Jean-Claude | 05/04/2010 17:57:53 |
| using Easy send and decoding the results/ puting it back together. | 12 | Jean-Claude | 05/04/2010 15:52:47 |
| IC socket problems | 6 | member02 | 05/04/2010 00:06:18 |
| mpr084 | 1 | metRo_ | 30/03/2010 13:08:17 |
| troubleshooting non working boards | 4 | Jean-Claude | 29/03/2010 22:56:36 |
| Extending Jeemon 2010? | 8 | rinie | 29/03/2010 12:19:56 |
| jeemon and how best to leverage the data coming in from jeenode | 2 | Jean-Claude | 29/03/2010 07:59:31 |
| Debugging Room Board | 2 | MarvinGS | 24/03/2010 13:35:41 |
| JeeMon on CentOS Linux need GLIBC 2.7 | 2 | Jean-Claude | 24/03/2010 12:16:51 |
| rf12demo problem | 12 | mildlymad | 23/03/2010 17:03:14 |
| Decoding different OOK (ASK) | 5 | matajumotors | 19/03/2010 20:44:42 |
| Use of "digitalWrite" on the Output-Plug? | 3 | sysrun | 18/03/2010 16:03:46 |
| Not receiving a signal from JeeNode | 14 | bdwong | 17/03/2010 00:30:48 |
| LCD plug | 16 | matajumotors | 15/03/2010 07:37:31 |
| Connecting the Arduino Duemilanove to a PP1 | 11 | Jean-Claude | 13/03/2010 18:21:12 |
| how can I extend jeenode wireless range ? | 2 | Jean-Claude | 11/03/2010 00:13:52 |
| How do I send a complete string to specific Node ? | 7 | matajumotors | 10/03/2010 13:30:01 |
| RF12Demo Help Needed! | 4 | Jean-Claude | 08/03/2010 09:47:03 |
| BlinkPlug class | 2 | Jean-Claude | 03/03/2010 21:43:14 |
| RF12Demo Problems | 5 | sysrun | 03/03/2010 15:19:38 |
| rooms sketch with ds18b20 sensor | 2 | Jean-Claude | 01/03/2010 19:17:59 |
| JeeNode Diagnostics | 3 | Jean-Claude | 28/02/2010 11:52:10 |
| Rooms code with PIR sensor, power consuption help | 9 | Jean-Claude | 22/02/2010 10:17:21 |
| Tips for next time? | 3 | Jean-Claude | 21/02/2010 23:17:11 |
| OOK values for S 300 TH | 7 | rashidw | 20/02/2010 18:51:19 |
| Trying to learn to code from Arduino to jeenode. Cross reference Arduino pins | 5 | weylan | 17/02/2010 18:34:11 |
| Setting up and running JeeLib/JeeMon | 11 | rashidw | 16/02/2010 21:22:40 |
| rf12demo and led? | 2 | Jean-Claude | 16/02/2010 10:21:17 |
| Suppress DF and DE messages from JeeLink | 4 | macgregor_sailer | 12/02/2010 00:16:54 |
| Setting up master-slave nodes (modifying blink_recv) | 4 | peterMac | 11/02/2010 20:47:12 |
| Pressure Sensor is off | 6 | Rubi | 01/02/2010 13:48:55 |
| rooms Question | 4 | bmj | 31/01/2010 20:46:28 |
| rooms Question | 5 | Jean-Claude | 30/01/2010 09:51:35 |
| FTDI Interface - caution | 2 | Jean-Claude | 28/01/2010 12:44:06 |
| rfm12 explanation of posting please | 6 | vektorsau | 27/01/2010 15:54:49 |
| Sf1 filter cap, wher to buy ? | 3 | Rubi | 26/01/2010 09:52:10 |
| Contrast on LCD plug | 3 | s.mihai | 25/01/2010 05:51:59 |
| Pressure plug - negative temperatures | 14 | Jean-Claude | 23/01/2010 16:06:48 |
| RFM 12 easy send | 4 | Jean-Claude | 22/01/2010 14:50:48 |
| PlugShield combination Pressure plug | 2 | Jean-Claude | 15/01/2010 15:09:51 |
| Howto use AIO as DIO ?? | 4 | Jean-Claude | 10/01/2010 16:42:53 |
| Access to /dev/ttyUSB0 from command line without arduino | 4 | Jean-Claude | 08/01/2010 00:37:07 |
| Compilation error | 5 | kellerza | 07/01/2010 08:26:41 |
| MilliTimer bug? | 2 | Jean-Claude | 06/01/2010 00:19:08 |
| USB to TTL serial cable | 3 | gotcha | 03/01/2010 11:07:00 |
| Re: Correct Board type in Arduino IDE 0017 for JeeNode v4 | 2 | kellerza | 29/12/2009 09:57:40 |
| rf12_easySend() vs. RF12.send() question | 2 | Jean-Claude | 17/12/2009 22:48:50 |
| rf12_easySend() question | 4 | Jean-Claude | 17/12/2009 11:04:53 |
| Strange things when using RFM12 as a FS20 transmitter | 4 | Jean-Claude | 13/12/2009 20:35:36 |
| Getting Arduino to talk to Jeenode | 2 | Jean-Claude | 10/12/2009 11:54:47 |
| Questions about potential application of JeeNode | 2 | Jean-Claude | 09/12/2009 13:41:42 |
| RF12 node ID is reseting to "Q" | 4 | Jean-Claude | 06/12/2009 20:32:54 |
| switch off /on backlight lcd-plug | 3 | Jean-Claude | 18/11/2009 20:58:58 |
| simple write and read location in eemem plug | 4 | Joop | 13/11/2009 08:51:34 |
| JeeNode v2 range | 4 | rmax | 22/10/2009 11:54:45 |
| RF12 R17 - MultiTimer Update appears to break rf12serial and rf12stream examples | 2 | Jean-Claude | 12/10/2009 07:49:18 |
| Conflicts between Ports and RF12 libraries | 3 | amvv | 04/10/2009 11:24:56 |