My Jeelink is not receiving anymore. Nothing was changend.
The log seems to be ok: ` [RF12demo.3] A i1 g212 @ 868 MHz DF I 62 2
Available commands: i - set node ID (standard node ids are 1..26) (or enter an uppercase 'A'..'Z' to set id) b - set MHz band (4 = 433, 8 = 868, 9 = 915) g - set network group (RFM12 only allows 212) c - set collect mode (advanced, normally 0) t - broadcast max-size test packet, with ack ..., a - send data packet to node , with ack ..., s - send data packet to node , no ack l - turn activity LED on PB1 on or off Remote control commands: ,,, f - FS20 command (868 MHz) ,, k - KAKU command (433 MHz) Flash storage (JeeLink v2 only): d - dump all log markers ,,,,, r - replay from specified marker 123,, e - erase 4K block 12,34 w - wipe entire flash memory Current configuration: A i1 g212 @ 868 MHz `
Seems to be okay when the sender is very near to the JeeLink. Whats happend there?