This is my first post and want to say my " Hello World !" to everyone.
My name is Iulian, I live in Dublin and spent last couple of nights "studying" the great work you've all been doing with this Jeenode project. Thank you !!!!
I need a recommendation regarding my first order. I want to use Jeenode to monitor and control the environment in a greenhouse. Nothing too complicated, temperature (1-wire), humidity and 1-2relays to control ventilators & dampers.
My questions are: - with power consumption not a problem(for Jeenode, not for the overall project), what can I purchase to drive the relays (noticed that Relay Plug is not available at the moment). - can 3 1-wire temp sensors + 1 humidity sensor (0-5v) + 2 relays be connected and controlled only by a single Jeenode? - can the Jeenode act as a stand alone controller to open/close the dampers and ventilators depending on the temp/humidity readings? My choice for a firs order will normally be: - 1 Jeenode (v5) - 1 Jeelink (v2) - 1 USB BUB - 1 Relay Plug (problem, as not avail at the moment)Any recommendations? - 1 set of plug headers. Please let me know is something available to replace the Relay Plug and if something else needed in order to accept this setup.
Thank you in advance for your time and help!